Install Curved Stair Carpet Runners

May 11th

To install curved stair carpet runners, starting with measure and mark a 2-inch board with a pencil along the side edges. And also 1-inch edge along the back edge of each ladder using a carpenter’s team. Cut a 1/4-inch thick foam rectangle with shears. These to cover the inside shape of each scale minus 2-inch sides. Add 1 inch to the width of each foam. Place each foam form on each scale, placing them in place.

Wool Stair Carpet Runners
Wool Stair Carpet Runners

Then staple them down using a staple gun and 1/2 inch staples. Select a curved stair carpet runners mat that fits along the length of the stair case, as well as within the width you’ve marked. Pass the runner ladder mat above the ladder, placing it directly above the foam forms. So that the curved end is at least 2 feet from the last ladder. Staple along the bottom edge of the last ladder to secure the bottom of the stair runner in place.

12 Photos Gallery of: Install Curved Stair Carpet Runners

Image of: Wool Stair Carpet Runners
Image of: Using Stair Carpet Runners
Image of: Stripe Stair Carpet Runners
Image of: Stair Carpet Runners Ideas
Image of: Stair Carpet Runners Direct
Image of: Stair Carpet Runners Cost
Image of: Stair Carpet Runners Benefit
Image of: Pattern Stair Carpet Runners
Image of: Green Stair Carpet Runners
Image of: Dark Blue Stair Carpet Runners
Image of: Coir Stair Carpet Runners
Image of: Cheap Stair Carpet Runners
 

Push a carpet stretcher upward to keep the carpet stretched along the first rise in the ladder. Then staple along the bottom of the first step using the staple gun. Push the carpet stretcher over the first step to keep the rug taut. Then staple along the back edge of the first step. Push the carpet stretcher upward along the second rising ladder. Then staple along the bottom side of the second stage. Repeat this process until the whole of the stairs have been covered by the stair carpet runners.